Product information "40pcs. Injector Extractor Set CDI for Removal of Diesel Injectors"
The 40-piece CDI injector extractor set facilitates the disassembly of diesel injectors. With this set, damaged diesel injectors can be easily pulled out of the cylinder heads. By extensive adaptation the set can be used for the most common injectors. The set contains three different slide hammers. These include a 160 mm long slide hammer with 1.6 kg, a 460 mm and 2.7 kg slide hammer and a 600 mm long slide hammer with 5.1 kg. The set also includes two extraction claws of different sizes with fork opening. These are 105 mm long (13.7 x 18 mm) and 130 mm long (12.7 x 19 mm).

In the injector extractor set there are 5 slotted hexagon sockets. The socket wrenches are each 100 mm long and suitable for wrench sizes 25, 27, 28, 29 and 30. The set also includes injector extractors in sleeve design with support shells. These have an outside diameter of 35 mm, an inside diameter of 29 mm and a spindle with M17 x 1.0 external thread. In addition, the set includes three pull-out adapters with external thread M27 x 1.0 and one pull-out adapter with external thread M25 x 1.0, three pull-out adapters with internal thread M27 x 1.0 and a sliding hammer adapter for internal, external and claw extractors.


The 40-piece CDI Injector Extractor Set includes the following tools:

3 x sliding hammers:
160 mm long, 1.6 kg / 460 mm long, 2.7 kg / 600 mm long, 5.1 kg

2 x extraction claws:
13.7 x 18 mm, 105 mm long / 12.7 x 19 mm, 130 mm long

5 x slotted hexagon socket wrench:
100 mm long, wrench sizes 25, 27, 28, 29 & 30

1 x injector extractor:
inside diameter 29 mm, spindle M17 x 1,0

3 x pull-out adapters external thread M27 x 1,0

1 x pull-out adapter with external thread M25 x 1,0

3 x pull-out adapters female thread M27 x 1,0

1 x Sliding hammer adaptation for internal, external and claw extractors